|
|
|
|
 |
| |
| Your location:
Components > Motors |
Linear Motors
Direct drive technology with Baumüller linear
motors
| Baumüller linear motors
have been designed for use as direct drives with synchronous
motors. Customized motor concepts can be created using
a modular system, meaning that Baumüller linear
motors can achieve maximum thrust forces of up to 14,750
N.
Baumüller linear motors are synchronous motors.
They consist of a primary with a wound lamination stack
and a secondary with permanent magnets (magnetic strip).
The primary is laminated with carbon fiber. This allows
Baumüller linear motors to achieve consistently
high stiffness and maximum continuous force, thanks
to their improved capacity for heat dissipation.
|
|
The scope of products and services provided is not merely
limited to linear motor components. On the contrary, Baumüller
offers the user a plug & play solution with clearly defined
interfaces that can be immediately connected to his machine,
in the form of a very compact and flexibly designed complete
linear axis, LSA, which is essentially comprised of linear
components, a guidance system, a mechanical structure, and
a length measuring system.
Customized motor concepts
The scope of products and services provided
is not merely limited to linear motor components. On the
contrary, Baumüller offers the user a plug &
play solution with clearly defined interfaces that can
be immediately connected to his machine, in the form of
a very compact and flexibly designed complete linear axis,
LSA, which is essentially comprised of linear components,
a guidance system, a mechanical structure, and a length
measuring system.
 |
|
|
Baumüller linear motors
– The secrets of their success:
-
They replace traditional
solutions for linear motion that are not
driven directly (spindle, belt, rack-and-pinion,
chain drives, etc.).
-
The tried-and-tested converter
and controller technology used in Baumüller
rotary drive systems can be used for linear
systems without restriction.
-
Modular system with various
motor frame sizes and lengths: optimum solution
in terms of cost
-
Designed to give maximum
performance with feed forces of up to 14,750
N and speeds of up to 10 m/s
-
Optional secondary cooling:
improved workpiece quality
-
Various winding designs
for all motor sizes to ensure optimum velocity
adjustment
-
Carbon fiber lamination
of the primary, optional for the secondary:
increased productivity and service life
-
IP65 type of protection
for all motor components: increased service
life
-
Motor winding protected
against thermal overload by means of integrated
temperature sensors (temperature detector
and KTY84)
-
Highly flexible, tension-relieved
and screened power cable feed
-
Repeat accuracy of down
to 2 µm
|
|
|
© Baumüller Nürnberg GmbH. All rights reserved.
|
|
|
|
Print
page 
Save
as your favorite
Contact
Sitemap
Imprint
Page
up